TOOLBOX 201-PIECE

TOOLBOX 201-PIECE CRAFT-MEYER

That’s it! The Craft-Meyer tool case, which meets the needs of motorcycle screwdrivers, car hobbyists, DIYers. The content comprises 201 parts: keys, nuts, bits, pliers, screwdrivers, electrical connectors . . . the whole program – all practical and material-friendly sorted in plastic inserts on 3 levels. This makes screwing even more fun.

Contents:

• 1 lever-shift-crank 1/2” with ejection protection
• 9 special sockets 1/2” in 10, 12, 13, 14, 17, 19, 22, 24 and 27 mm with flank attack against the round turning of screws or nuts
• 3 spark plug nuts 1/2” for 16, 18 and 21 mm candles with rubber insert
• 1 adapter piece from 1/2” to 3/8”
• 1 joint 1/2”
• 2 extensions 1/2”
• 1 lever-shift-crank 1/4” with ejection protection
• 12 special sockets 1/4” in 4, 4. 5, 5, 5. 5, 6, 7, 8, 9, 10, 11, 12 and 13 mm with flank attack against the round turning of screws or nuts!
• 6 inner hexagon nuts 1/4” in 3, 4, 5, 6, 7 and 8 mm
• 6 starbit nuts 1/4” in T10, T15, T20, T25, T30 and T40
• 3 slot bit nuts 1/4” in 4, 5. 5 and 6 mm
• 3 crossover bit nuts 1/4” in PH1, PH2 and PH3
• 1 articulated piece 1/4”
• 1 extension 1/4”
• 7 mouth ring wrenches in sizes 8, 10, 12, 13, 14, 17 and 19 mm according to DIN 3113A
• 3 slotted screwdrivers in the sizes 3x100, 6x100 and 8x150 mm
• 2 cross-slot screwdrivers in the sizes PH1x75 and PH2x100 mm
• 1 workshop hammer 300g according to DIN 1041
• 1 combination clamp 180 mm according to DIN 5244
• 1 side cutter 180 mm according to DIN 5238
• 1 flat round pliers 200 mm according to DIN 5236
• 9 hexagon wrenches with ball head and plastic holder in sizes 1. 5, 2, 2. 5, 3, 4, 5, 6, 8 and 10 mm
• 1 sensor gauge 20 sheets from 0. 05 mm to 1 mm in increments of 0. 05 mm
• 1 fine brass brush
• 1 test lamp 6 to 24 volts
• 1 cable shoe pliers
• 36-piece cable shoe set with various connectors, flat plugs and sleeves, ring cable shoes, round plugs and sleeves
• 1 precision gauge with locking
• 1 carpet knife with spare blades
• 1 roll of insulating tape
• 25 cable ties in lengths 10, 12 and 20 cm
• 1 electric cable 2 m, cross-section 1. 5 mm2
• 1 Flying safety box
• 5 flat plug fuses in 5 10, 15, 20 and 25 amps

• The case is made of robust steel sheet and is equipped with two ball-bearing drawers and a top compartment.
• The associated tool is mostly made of chromium-vanadium steel.
• Dimensions tool case (H x W x D) approx. 25 x 51 x 22 cm